Fusion EMPEROR L702B User Manual download pdf (Page 13)

CHARGING A NICD/NIMH PACK

In the flow chart below, we have shown an example of how to charge a 6 cell (7.2V)

3000mAh NiMH pack at 4.5 amps using a ‘Normal’ charge type.

1]NiMH 6S 3000mAh

CHG. : 4.5A 5mV/C

DCHG. :10.0A 0.8V/C

CYCLE : CD 1x 10m

 0]NiMH 6S 3300mAh

CHG. : 3.3A 5mV/C

DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

ENTER

Press and hold

the Enter button

for 2 seconds to

start.

[ NiMH ] CHARGE

*** BATTERY ***

*** CHECK ***

 0]NiMH 6S 3300mAh

CHG. : 3.3A 5mV/C

DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

C-AUTOMATIC 0:01:12

CAPACITY : 15mAh

VOLTAGE : 8.212V

CURRENT : 4.10A

 0]NiMH 6S 3300mAh

CHG. : 3.3A 5mV/C

DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

C-AUTOMATIC 0:04:02

INPUT VOLT : 14.222V

PEAK VOLT : 8.922V

AVG. VOLT : 0.000V

 0]NiMH 6S 3300mAh

CHG. : 3.3A 5mV/C

DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

Mode

ESC

C-AUTOMATIC 0:05:18

BAT. TEMP. : 22.1°C

PEAK TEMP. : 22.1°C

BATTERY RES: 100mΩ

 0]NiMH 6S 3300mAh

CHG. : 3.3A 5mV/C

DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

Mode

ESC

ENTER

Press and hold

the Enter button

for 2 seconds to

start the charge.

Press the ‘Inc’ or

‘Dec’ buttons to

change the

charge type.

▲

INC

DEC

▼

1]NiMH 6S 3000mAh

CHG. : 4.5A 5mV/C

CHARGE <AUTOMATIC>

 0]NiMH 6S 3300mAh

CHG. : 3.3A 5mV/C

DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

NORMAL

ESC

STOP

CHARGE

Press and hold

the ‘ESC’ button

for 2 seconds to

stop the charge.

After selecting charge for a NiCd or NiMH pack, you are given the option to select

four different charge types. These are:-

Automatic

This is a fully automatic charge that will ignore the selected charge parameters. The

charger will monitor the battery by stopping the charge for a few seconds every minute

and then automatically adjust the charge current to make sure the best charge current

is delivered to your pack.

Normal

The charger will charge the pack at the selected charge current, but will stop charging

for five seconds every minute. This allows for better peak detection.

Linear

The selected current is maintained throughout the charge.

Re-Flex

Reflex (sometimes know as ‘Burp’ or ‘reverse pulse’) charging is where the charger

applies a reverse charge of 4 times the charge current for 4/1000 of every second.

Reflex charging is believed to help remove oxidizing gas bubbles from the cell plates in

the battery, allowing it to charge more efficiently. Reflex charging is not always

recommended for NiMH cells, so please check with your battery manufacturer first.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Fusion EMPEROR L702B User Manual Page 13

Comments to this Manuals

Related products and manuals for Car battery chargers Fusion EMPEROR L702B