Fusion EMPEROR L702B User Manual download pdf (Page 7)

BATTERY MEMORY SCREEN

The battery memory screen is the main functional screen for this charger. It is used

to store specific battery, charge, discharge and safety parameters, as well as being

used to initiate charging, discharging, cycling/store mode functions.

11]LiPo 3S 2200mAh

CHG. : 2.1A 4.20V/C

DCHG. :10.0A 3.0V/C

STORE MODE START

 0]NiMH 6S 3300mAh

CHG. : 3.3A 5mV/C

DCHG. : 5.0A 0.8V/C

CYCLE : CD 1X 10m

Battery Capacity

Battery Type

Memory Number

Number of Cells

(in series)

Line selection

arrow

To edit the battery parameters, make sure the selection arrow is on the top line and

press the ‘Enter’ button to highlight the memory number. Using the ‘Inc’ or ‘Dec’

buttons, the selected memory (0~19) can be changed. By default each memory is

populated with a sample configuration, but these can be adjusted to suit your

requirements.

Pressing the ‘Enter’ button again selects the Battery Type for the selected memory.

The battery type can be changed using the ‘Inc’ and ‘Dec’ buttons.

The available battery types are:-

NiCd Nickel Cadnium (1.2V/cell) NiMH Nickel Metal Hydride (1.2V/cell)

LiPo Lithium Polymer (3.7V/cell) LiIo Lithium Ion (3.6V/cell)

LiFe Lithium Ferrite (3.3V/Cell) Pb Lead Acid (2V/cell)

Pressing the ‘Enter’ button again highlights the number of cells (in series), which can

be adjusted using the ‘Inc’ and ‘Dec’ buttons. If you are unsure of the number of cells

in your battery pack, then this can be calculated by dividing the total battery voltage

by the individual cell voltage.

Pressing the ‘Enter’ button again selects the battery capacity setting, then back to

the line selection arrow.

It is very important that the correct battery parameters are entered, as

incorrect values could cause the charger to seriously damage your battery

which could result in a fire!

Pressing the ‘Dec’ button whilst nothing is highlighted moves the line selection arrow

down.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Fusion EMPEROR L702B User Manual Page 7